Bradford SoundScreen R2.0 acoustic insulation batts help reduce airborne noise transfer between rooms and floors. Made from glasswool, they also provide thermal resistance. They are an option for suitable internal wall and mid-floor constructions in new builds and renovations.
Acoustic insulation can help improve privacy between bedrooms, living areas and home offices. However, the finished result depends on the complete construction, including wall linings, doors, gaps and other paths that allow sound to travel.
For this reason, choose insulation alongside the specified wall or floor system. Batts alone do not make a room soundproof. If your project has a particular acoustic requirement, confirm the construction details with your designer or installer before ordering.
Both pack options contain nine batts at a nominal thickness of 70mm. The 430mm-wide option contains approximately 4.5m² of insulation material, while the 580mm-wide option contains approximately 6.1m².
First, measure the spaces between framing members and check the available cavity depth. Then compare your measurements with the batt dimensions in the Specifications tab. The selected product should fit the intended construction without unwanted gaps or compression.
Our table lists actual batt area separately from coverage allowing for framing. Actual batt area describes the insulation supplied inside each pack. The framing-adjusted figure also accounts for space occupied by framing members.
When comparing prices per square metre, check which area figure is being used. In addition, discuss cutting and layout allowances with your installer when estimating the number of packs required.
Buy Bradford SoundScreen R2.0 online by selecting your required width and quantity. Collection is available from Breakwater, Geelong. Alternatively, check the available delivery areas and charges before completing your purchase.
Browse our Bradford insulation range for other options, or contact Home Insulation for help with product selection and quantities.
For technical information and installation resources, visit Bradford’s official SoundScreen product page.
| Product | Bradford SoundScreen R2.0 Acoustic Insulation |
|---|---|
| Thermal rating | R2.0 |
| Material | Glasswool |
| Nominal thickness | 70 mm |
| Recommended application | Internal walls and midfloors |
| 430 mm pack | 70 × 430 × 1160 mm (thickness × width × length) 9 batts per pack Actual batt area: 4.5 m² per pack Manufacturer coverage: 4.9 m² per pack |
| 580 mm pack | 70 × 580 × 1160 mm (thickness × width × length) 9 batts per pack Actual batt area: 6.1 m² per pack Manufacturer coverage: 6.4 m² per pack |
| Thermal testing standard | AS/NZS 4859.1 |
| Combustibility | Non-combustible (AS 1530.1) |
| Manufacturer warranty | 70-year product performance warranty; manufacturer terms apply |
Timber-frame pack figures from the May 2026 SoundScreen brochure. Actual batt area and manufacturer coverage are shown separately.
Source: Bradford Soundscreen Brochure data sheet.pdf (page 3).
If you are interested in a free, no obligation on site quote, please contact us on the number listed below, or include your name & best contact number in the field below & we will get back to you as soon as possible.