Save up to 50% on ceiling insulation

Earthwool R2.5 HD SoundShield Acoustic Insulation

430mm — $86.56 per pack incl. GST580mm — $113.84 per pack incl. GST

Earthwool SoundShield R2.5 HD is a high-density 90mm glasswool acoustic batt designed for better sound absorption as well as thermal performance. It’s a good fit for bedrooms, home offices, media rooms and walls shared with noisy spaces. Available in 430mm and 580mm widths.

Area & Pack Calculator

Choose your product options and enter your area.

Uses pack coverage allowing for timber. Rounds up to whole packs. Delivery will be combined with total at checkout.
Delivery Calculator
Delivery or collection

Enter your delivery postcode.

Delivery fee based on postcode.

Earthwool R2.5 HD SoundShield Acoustic Insulation

Knauf Earthwool R2.5 Wall Batts provide superior acoustic and thermal insulation for residential timber and steel frame walls. Manufactured with advanced ECOSE technology, these low-itch batts are engineered for 430mm and 580mm stud spacings.

Choosing Your Earthwool R2.5 HD SoundShield Pack

  • First, measure the clear spaces between your wall framing and check the available cavity depth. Then compare those measurements with the batt dimensions below. The selected width should suit the actual space and the manufacturer’s installation requirements.
  • The 430mm and 580mm options listed here are timber-frame sizes. If your project uses steel framing, confirm the specified dimensions before purchasing. Do not assume that the same batt width suits both framing systems.

For thinner wall frames, compare the 75mm Earthwool R2.0 HD Wall Insulation.

Pack Sizes and Coverage

  • The 430mm pack contains approximately 7.0m² of insulation material. For the wider 580mm option, the actual batt area is approximately 9.4m² per pack. Check the Specifications tab for the pack prices and coverage figures used on this page.

Actual batt area and coverage allowing for framing are different measurements. When comparing prices per square metre, use the same basis for each product. Also allow for your wall layout, openings and cutting when estimating quantities.

Planning Your Acoustic Wall Insulation

  • Choose the R-value to suit your building design and project requirements. R2.5 describes the material’s thermal resistance; the performance of the completed wall also depends on its other components and how the insulation is installed.
  • Acoustic batts reduce noise passing through a wall, but they will not make a room soundproof. The overall result also depends on the wall construction, the plasterboard and how well gaps are sealed. Gaps around services and fittings can let sound through, so seal them where the installation instructions allow.
  • Before work begins, check that the cavity is suitable and follow the manufacturer’s instructions around services and fittings. Install the batts with a consistent fit and sufficient space to maintain their specified thickness. Wall batts are not designed for ceilings, so use ceiling insulation products there.

Order Earthwool R2.5 HD SoundShield from Home Insulation

Select your required width and quantity when ordering online. Collection is available from Breakwater, Geelong. Alternatively, check the available delivery areas and charges before completing your purchase.

Browse our wall insulation range to compare options, or contact Home Insulation for help understanding pack sizes and quantities.

For a installation guide, see the Official Installation Guide.

For technical specifications, read the Official Knauf Earthwool wall batt datasheet.

Earthwool R2.5 HD SoundShield Acoustic Insulation specifications
Product Earthwool R2.5 HD SoundShield Acoustic Insulation
Thermal rating R2.5 HD SoundShield
Material Glasswool with ECOSE plant-based binder
Nominal thickness 90 mm
Recommended application Wall cavities of the specified width and depth
430 mm pack 90 × 430 × 1160 mm (thickness × width × length)
14 batts per pack
Actual batt area: 7.0 m² per pack
Manufacturer product code: 2437532
580 mm pack 90 × 580 × 1160 mm (thickness × width × length)
14 batts per pack
Actual batt area: 9.4 m² per pack
Manufacturer product code: 760109
Thermal testing standard AS/NZS 4859.1
Combustibility Non-combustible (AS 1530.1)

The supplied August 2025 sheet lists actual batt area per pack, not a separate framing-adjusted coverage. Dimensions are nominal.

Source: Knauf Insulation Datasheet – Earthwool Wall batts.pdf (page 2).

Contact Us With an Enquiry

If you are interested in a free, no obligation on site quote, please contact us on the number listed below, or include your name & best contact number in the field below & we will get back to you as soon as possible.