Pink® Batts R2.0 Wall Insulation (90mm)

Pink Batts are one of the most recognised names in Australian insulation, and the R2.0 wall batt is a dependable choice for keeping homes warmer in winter and cooler in summer. At 90mm thick, it’s made to fill a standard 90mm wall cavity, with a firm fit so the batts stay put and keep performing.

Key benefits

• R2.0 thermal rating for walls
• 90mm thickness to suit 90mm wall frames
• Easy to handle, with a firm fit that keeps batts in place
• Non-combustible
• Made from up to 80% recycled content
• Made in Australia by Fletcher Insulation

Where to use it

• Internal and external walls in houses, townhouses and apartments
• New builds, extensions and renovations
• Wall cavities in schools and aged care facilities

Installation tips

• Follow the Pink Batts installation guide for walls and the relevant building requirements. Pink® Batts Wall and Ceiling Installation Guide
• Cut batts slightly oversize so they friction-fit between studs.
• Fill the cavity fully, without compressing the batts, and avoid gaps at the corners and edges.
• Wear gloves, long sleeves and a dust mask when cutting.
• Check the NCC requirements for your climate zone.

Where it’s not for

These are wall batts. For ceilings, use ceiling batts. Home Insulation | Ceiling Insulation Products

FAQ

What does R2.0 mean? It’s the thermal resistance rating. A higher R-value means better insulation.
Will it fit a 90mm frame? Yes, that’s the thickness it’s designed for.
What’s the difference between R2.0 and R2.0 HD? The standard batt is 90mm thick, and the HD batt is a denser 70mm product with fewer batts per pack.
Can I use it in a ceiling? No. Use ceiling batts for ceilings.
Is it covered by a warranty? Yes, it has a consumer lifetime product warranty from Fletcher.
How many packs do I need? Measure the wall area, subtract windows and doors, then divide by the coverage per pack and allow a little extra.
Can I collect in store? Yes, click-and-collect is available at checkout.